Oxyl-Pro® Hand and Surface Disinfectant has been tested on enveloped viruses including coronavirus
Oxyl-Pro is a new disinfection product that can be used without worrying about the potential for the cure being worse than the disease. Oxyl-Pro sets itself apart from other disinfectants by using only food safe stabilisers along with aseptic grade hydrogen peroxide. The combination of our unique stabiliser and hydrogen peroxide has created a powerful all-purpose broad-spectrum disinfectant and decontamination product with an excellent ecological profile; it truly does just degrade to oxygen and water.
Oxyl-Pro® is certified under NSF / ANSI 60 for drinking water. This accredited certification proves that Oxyl-Pro® has no harmful by-products from use.
Oxyl-Pro® has been tested and found effective at the following ISO standards:
- NS-EN 14476:2013+A2:2019 Virucidal activity
- NS-EN 1276 Bactericidal activity
- NS-EN 1650 Fungicide activity
- NS-EN 1500 Hygienic Handrub Method
Oxyl-Pro® has been tested with good effect against several bacteria, viruses, fungi and other microorganisms. Including enveloped viruses (such as Corona), Salmonella, Legionella, Polio, Adeno, Campylobacter, Staphylococci, E. coli, E. coli (as handwash), Pseudomomas, Cancica albicans and Listeriosis. Oxyl-Pro® is also the only Biocid product in the world with no claims.
The new disinfectant OXYL-PRO® is both sustainable and effective!
Oxyl-Pro consists of gel-stabilized hydrogen peroxide, and eliminates bacteria, viruses, fungi, and other microorganisms by oxidation
Oxyl-Pro contains no alcohol or ethanol acids, only use food safe ingre-dients in the production process, and degrades to oxygen and water.
- Documented effect against several bacteria, viruses, fungi, and other microorganisms. Amongst these; all enveloped viruses
- No dryness og allergic reactions
- No fire hazard
- No unpleasant fumes
- 100% sustainable
- Stabile up to 90°C
- Can be used on all surfaces
The Norwegian Environment Agency’s guidelines for biocides (including hand disinfectant):
The products must not pose a major risk for health and environment, and provide functionality fit for purpose.
Health risk: No
Environmental risk: No
Documented efficiency and fit for purpose: Yes
Alcohol- and chlorine-based products
Health risk: Yes
Environmental risk: Yes
Documented efficiency and fit for purpose: Varying…
Oxyl-Pro® Hand and Surface Disinfectant
Oxyl-Pro® Hand and Surface Disinfectant is a disinfectant available for everyone to buy, to use as surface disinfectant. The use of the product is simple:
- Spray onto clean surfaces and leave for 5 minutes. Do not rinse. Wipe dry with a clean lint free cloth if required.
- Spray sufficient solution onto hands to cover, rub and leave to dry.
Oxyl-Pro® Clean for professional use
For larger surfaces, in professional use, Oxyl-Pro® Clean can be used instead by filling back-carried sprayers or similar with concentrations of Oxyl-Pro® Clean.
- High Contamination:
500ml per 10L (5% solution). Contact time: 30min. No rinsing.
- Low Contamination:
100ml per 10L (1% solution). Contact time: 30min. No rinsing.
Always assume high contamination if unknown.
Large surfaces can also be disinfected by adding Oxyl-Pro® Clean to the fogging/misting system in a 10% solution. Ensure that there are no people in the area being fogged when this operation is performed.
Documented effect on all enveloped viruses